-Test-Um Test Equipment
!

Authorised Test-Um Distributor
!
Test-Um Logo

 

Tri-Porter
IVT-600
Weight: kg
!
IVT600 A
Larger picture 

New!  Available Now.

The Tri-Porter Replaces up to 6 traditional Testing Tools!

Services Voice, Data, and Video

The first network installation tester that provides a full range of physical wiring tests for the fast, efficient delivery of IP-based voice, data and video services in the home or small office with one integrated tool.

 
Voice Telephony Testing
Testing and verifying proper operation of each telephone outlet assures adequate signal levels for all offered services. Power-up telephone systems with the on-board dial tone simulator (SLIC) to test connected runs.
  • Advanced-function telephone butt set
  • Call analysis and discovery
  • Voltage and current readings
  • Line number discovery with captured digits
  • DTMF decode to watch dialed call numbers for accuracy
  • Call Waiting service testing
  • SLIC simulator to test lines without outside provider service
  • Speakerphone for hands-free listening to dial tone and line monitoring
  • DSL safe
  • 20-pc remote wiremapping set

Data Testing Ethernet Networks
Test newly-installed network cables on unpowered systems or check active working networks to detect any physical layer or configuration problems.

  • Configure the network, test the cables and guarantee the quality
  • Tests to TIA568 interconnect specifications and connected length; CAT5, 5E and 6
  • Port discovery—ISDN, POTS, Token Ring, Ethernet, etc.
  • Negotiates at 100 Mbit with DHCP or manual addressing
  • Ping for IP address information and configuration
  • Identify equipment on the other end of the line, showing its speed and type
  • Link speed displayed, 10/100Mbit
  • Hub blink to find connected ends in wiring closets
  • Qualify lines for VoIP service at 100Mbit speeds
  • Cisco Discovery Protocol ready
  • 20-pc remote wiremapping set

Video RF Detection and Testing
HDTV, video-on-demand, cable modems, etc., all demand superb signal quality to work correctly. Testing for physical and electronic variations will guarantee that everything works as it should.

  • Detects and measures RF service energy levels DB/Mv
  • Tests for opens and shorts
  • Displays length of each tested run
  • 20-pc remote wiremapping set
  • The unique tone signal— which travels through splitter, filters and traps to trace lines while the system is powered-up and in-use—is detectable by the Tri-Porter tracer unit

 

Low Cost Test Set or Buttinski

LB-300
Weight: kg
!
LB300
Larger picture 

Resi-TalkerTM Test Set

Test-Um's most economical test set for basic telephone system work

  • Tone and Pulse Dialing
  • Microphone Mute
  • Last Number Redial - 32 digits
  • Continuous Line Polarity Indication (TALK or MONITOR)
  • Electronic Ringer
  • Amplified Line Monitor for volume levels comparable to "off hook" operation
  • RJ12 Modular Cord Set Attachment
  • Includes test lead, RJ12 to Alligator Clips
  • Low Battery Indicator
  • Battery Powered Monitor Mode with auto power off on dead lines or when disconnected

    • Note; This Butt has approx 270K Ohm loop resistance when in "Bell" or "Monitor" Modes. This is so that the Line polarity circuity functions correctly.

    Lil' Buttie Test Set or Buttinski
    LB100
    Weight: kg
    !
    LB100
    Larger picture 

    Lil' ButtieTM

    Lil' Buttie: Hands free test set with headset. At half the size and half the weight, the Lil' Buttie sets a new standard in field test sets.

  • Includes Handsfree Headset
  • Tone and Pulse Dialing
  • Microphone Mute
  • Last Number Redial --- 32 Digits
  • Continuous Line Polarity Indication (TALK or MONITOR)
  • Electronic Ringer
  • Amplified Line Monitor for volume levels comparable to "off hook""operation
  • RJ12 Modular Cord Set Attachment
  • Includes test lead, RJ12 to Alligator Clips
  • Low Battery Indicator
  • Headset Jack
  • Battery Powered Monitor Mode with auto power off on dead lines or when disconnected
    • Note; This Butt has approx 270K Ohm loop resistance when in "Bell" or "Monitor" Modes. This is so that the Line polarity circuity functions correctly.

    Lil' Buttie PRO Test Set or Buttinski
    LB220
    Weight: kg
    !
    LB200
    Larger picture 

    Lil' Buttie ProTM

    Telephone test set with LCD readout and voltmeter

  • Five Number Memory
  • Technical Support Number programmed into memory dial
  • Tone and Pulse Dialing
  • Microphone Mute
  • Last Number Redial --- 19 Digits
  • Electronic Ringer
  • Amplified Line Monitor for volume levels comparable to "off hook" operation
  • Modular Cord Set Attachment
  • Headset for hands-free use
  • Auto Power Off eliminated dead batteries
  • LCD Display shows ---
    - On-hook voltage
    - Number dialed
    - Off-hook current
    - Set-up information
    - Stored numbers
    - Battery condition
    - Continuous polarity indication
    - Caller ID
    - Call waiting / Caller ID
    - Caller ID errors
    - Tone and Pulse Dialing
    • Note; This Butt has approx 270K Ohm loop resistance when in "Bell" or "Monitor" Modes. This is so that the Line polarity circuity functions correctly.

    Ranger Butt Set with 12Khz Detect and DTMF Decode
    LB255
    Weight: kg
    !
    LB250-VGA
    Larger picture 

    RangerTM

    The most powerful test set Test-Um builds, it incorporates a built-in amplified speaker, as well as new, advanced features unavailable on any other test set in the market like 12Khz Pulse detect and DTMF Digit capture 

  • DigiViewTM or Digit Grabber DTMF Decode that allows you to see the digits as a dial-out is in progress and capture those digits. Stores 32 Digits before screen needs clearing 
  • ADLITM Auto Dial Line Identification - Inbound and outbound line identification with caller ID testing.
  • TrafixguardTM Senses digital lines and identifies under- and over-voltage conditions. Totally DSL safe!
  • Insta-TalkTM Amplified Speaker with simultaneous intercom capability for talking while testing.
  • 12Khz Meter pulse detect SPM
  • Amplified Speaker with three volume levels
  • Enhanced Memory Dialing - alpha and numeric capability
  • Eight Number Memory
  • Tone and Pulse Dialing
  • Microphone Mute
  • Last Number Redial - 24 Digits
  • Electronic Ringer
  • Amplified Line Monitor for volume levels comparable to "off hook" operation
  • Modular cord set attachment
  • Headset for hands-free use
  • Auto power off eliminates dead batteries
  • LCD Display shows ---
    - On-hook voltage
    - Number dialed
    - Off-hook current
    - Set-up information
    - Stored numbers
    - Battery condition
    - Continuous polarity indication
    - Caller ID
    - Call waiting / Caller ID
    - Caller ID errors
    • Note; This Butt has approx 270K Ohm loop resistance when in "Bell" or "Monitor" Modes. This is so that the Line polarity circuity functions correctly.

    Turbo-Tone Generator
    TG-200
    Weight: kg
    !
    TG200B
    Larger picture 
    Turbo-ToneTM The most powerful tone generator you can put in your pocket. The Turbo-ToneTM generates as much as 700% more power than standard tone generators!
  • Extra-long-distance capability. Detect tone up to 20 miles away
  • Constant amplitude output for 100% signal strength all the time, no signal decrease as battery discharges
  • Easily hear signal through walls and enclosures
  • Multiple tones and power levels for all applications - CAT 5/6, signal wire, coax, telephone cable
  • Unbalanced tone mode for longer distances on CAT 5/6 cables
  • Auto-off for battery conservation
  • Full talk battery and constant polarity check included
  • Includes adapter cables and carrying case
  • Alligator Clips

    • High Sensitivity Tone Tracer
    TT-100
    Weight: kg
    !
    TT100
    Larger picture 
    High-Sensitivity Tone Tracer The Tone Tracer sets a new standard for field service professionals. Due to its slim, ergonomic design, as well as balanced weighting, the TT100 is the most comfortable tracer available. It can be used with either a wearable headset of a standard cell phone headset. Quick-change tips make for easier in-field use. Includes low battery indicator

    LAN ROVER Tester/Analyzer
    TP-500
    Weight: kg
    !
    TP500
    Larger picture 

    LanRoverTM

    Offers a new price/performance level for verification of wiring faults and configurations on all your data cable

  • Cable test results displayed on main unit and remote unit, in less than 2 seconds after plugging in the cable
  • Auto-on and auto-off when testing cables, just plug both ends into tester!
  • Snap-together case for easy storage and convenient patch cable testing
  • Tone generator mode for use with tone tracers, auto-off
  • Debug mode with from/to and failures for each pair
  • Test for short, opens, miswires, reversals and split pairs
  • Battery low indicator

    • LAN ROVER PRO Tester/Analyzer
    TP-600
    Weight: kg
    !
    TP600
    Larger picture 

    LanRoverPROTM

    This high-performance length measurement CAT 5/6 tester identifies multiple faults clearly without interpretation for fast results; clear wiremapping form displayed on 2-line, 16-character LCD display; and measures cable length

  • Measures cable length as a stand-alone function
  • Test for short, opens, miswires, reversals and split pairs
  • Identifies multiple faults clearly without interpretation
  • Clear wiremapping form displayed in 2-line, 16-character LCD display
  • Auto-off/Auto-on. Up to 10 times better battery life than other testers
  • One-ended testing with Pre-test mode for fast results
  • Built-in tone generator with selectable tones and pair capability

    •  

    LanRoverPRO Kit with 8 remote identifiers

    TP-607
    Weight: kg
    !
    TP607
    Larger picture 

    LanRoverPROTM

     

    Kit with 8 remote identifiers Number 1 - 8

    This high-performance length measurement CAT 5/6 tester identifies multiple faults clearly without interpretation for fast results; clear wiremapping form displayed on 2-line, 16-character LCD display; and measures cable length

  • Saves Time Identifing Outlets ( Remotes No 1 - 8 displayed on LCD )
  • Measures cable length as a stand-alone function
  • Test for short, opens, miswires, reversals and split pairs
  • Identifies multiple faults clearly without interpretation
  • Clear wiremapping form displayed in 2-line, 16-character LCD display
  • Auto-off/Auto-on. Up to 10 times better battery life than other testers
  • One-ended testing with Pre-test mode for fast results
  • Built-in tone generator with selectable tones and pair capability

    •  

    RJ12 Breakout Box or 'Modtest'
    LB66
    Weight: kg
    !
    LB66
    Larger picture 
    Gain circuit access without disconnecting equipment. Angled sturdy copper contacts prevent clips from disconnecting during testing.

    Has an RJ12 6P6C on each end with 6 positions for Alligator clips to be attached in body on unit.

    Comes with short RJ12 to RJ12 lead.

    RJ45 Breakout Box or 'Modtest'
    LB68
    Weight: kg
    !
    LB68
    Larger picture 
    Gain circuit access without disconnecting equipment. Angled sturdy copper contacts prevent clips from disconnecting during testing.

    Has an RJ45 8P8C on each end with 6 positions for Alligator clips to be attached in body on unit.

    Comes with short RJ45 to RJ45 lead.

    "Testifier" All Cable Tester
    TP-350
    Weight: kg
    !
    TP-350-Small
    Larger picture 

    The new TestifierTM produces the most accurate and easy-to-understand results of any cable tester/verifier on the market.

    Its large LCD display is easy to read--it shows a clear picture of a wired cable; data, coax, telephone, security/alarm, or unterminated site wire.

    Condition: Testifier shows Opens, Shorts, Miswires, Split Pairs, PASS and FAIL results fast - on a clear, full alpha/numeric LCD display.

    Location: Testifier is supported by the most comprehensive set of optional wiremapping locators in the world.

    Up to 20 cable end locations at a time can be identified and tagged.

     

    Position: Testifier's built-in tone generator is the most flexible and function-packed tone generator you will ever use.

    Its configurable signal can be generated to find and fix the position on any type of cable - either exposed or hidden, in ceilings or behind walls

     

    Tone Generator with Dial Tone Simulation
    TG400
    Weight: kg
    !
    TG400
    Larger picture 

    · "Powers-up" the installed telephone lines under actual load conditions with a simulated dial tone to check connectivity and proper wiring configurations without a service connection

    · Full-feature tone generator with 3 different tone sounds and continuity test

    · Generates a unique tone sequence for testing speaker installations by "popping" speakers---will work with either AC or DC coupled speaker types

    · Requires 9V battery (not included)

    Suitable Tone Detector/Probe is TT100

     

    "F" Set with Turbo Tone Generator
    KP105
    Weight: kg
    !
    KP105
    Larger picture 
    TG200 and TT100 in a Nylon Pouch
    A tough CorduraTM kit pouch houses the Tone Tracer (TT100) and the 'Turbo' Tone Generator (TG200) for convenience in the field. A closure flap protects the instruments and has both a belt loop on the back as well as a metal clip ring for multiple mounting options. The kit includes one cord set with alligator clips.

    TT100: Tone Tracer
    The Tone Tracer sets a new standard for field service professionals. Due to its slim, ergonomic design, as well as balanced weighting, the TT100 is the most comfortable tracer available. It can be used with either a wearable headset of a standard cell phone set. Quick-change tips make for easier in-field use.

    TG200: Turbo-Tone
    Turbo-ToneTM generates as much as 700% more power than standard tone generators! Advanced features give you more control and options for all field applications - it's pocket-sized, but packed with giant benefits.

     

    Validator NT
    NT-955
    !
    NT-955Kit
    Larger picture 

    Cat 5e & Cat 6  Network & Cable Certifier 

    To see Demonstation Click on This text.

    • The new Validator-NT Ethernet System All-in-One Network Management Tool puts the power of network test and configuration in your hand at an affordable price. Validator-NT’s patented method of uploading and downloading information about cable tests and network configuration will help you gather the necessary information to manage your network easily, while documenting changes, upgrades or new configurations. Validator-NT measures and presents fast and clear SPEED and PERFORMANCE CERTIFICATION results up to 1 gigabit. Speed certification assures the cabling will do the job it is rated to do. Network components such as switches, hubs, routers and systems will then operate at maximum efficiency. Wire maps up to 8 locations with the network remote identifiers.

      The included powerful Plan-Um software ties together all the different cable criteria that are found in complex voice/data/video installations and presents concise information in printed reports, while storing data for future use. Simply layout your customer’s requirements in a matter of minutes, then define cable types and runs. Test/certify each cable run. Print the results and attach them to your invoice. Completing and billing a cable installation job has never been easier.

      • Supports IEEE 802.3 data speed carrying specifications to 1 gigabit Measures cable length and distances to opens and shorts using advanced TDR technology Tests telephone, coax, security/alarm, cables for continuity, proper termination and polarity Tests shielded or unshielded Cat3, 5, 5E, 6 Wiremaps individual runs to locate and identify cable routes
      • Tests interconnect specifications per TIA 568/570, including opens, shorts, miswires, split pairs, etc.
      • Active network capabilities for test, link and identification
        • Port Services
        • Ping Testing
        • Hub Flash
      • Cable Quality Tests
        • SKEW NEXT—All combinations on all pairs (12) Channel Response Echo Testing (Return Loss) impedance mismatches Signal to Noise Ratio Attenuation Amplitude Return Loss
        • Bit Error Rate (BERT)
      • Measures signal quality in actual link environments that could account for cable inadequacies, such as physical installation problems, kinks, loops, physical terminations, dry shorts, or miswires. Store data on either a laptop/PC or in flash card memory up to 2 GB. Use archived info when upgrading or changing previously installed systems.

      NT955 Package Contents

      • Validator NT Main Unit and Smart Remote, 2 lithium ion rechargeable long-life batteries, 2 AC adapter/charger units, Test Connectors 8-position shielded modular jack (data), 6-position modular jack (telephone), F-coax (video), and dual banana jack (security, speaker, etc.) USB cable assembly, Compact flash card, Plan-Um™ design layout software, Cable Certification Labels (roll of 100), Set of 8 network remote identifiers, and 2 Sacrificial Cable modules (RJ 45)
      • Deluxe carrying case with cushioned sides

    LanScaper Network Tester
    NT700
    Weight: kg
    !
    nt700

    LanScaper Network Tester

    Perform physical layer network management with the functions of a high-end cable tester and length measurement device plus the capability to monitor and correct network problems associated with the physical layer and link conditions of the network.

    Key Features

    • Identifies port services like Ethernet, ISDN, POTS and Token-Ring while reporting network speed, capability and location of switches and other network devices
    • Pinging function verifies connectivity to network devices and queries PC/NICs.
    • Detects legacy "Phantom Power", reports current and voltage capability of analog telephone lines, identifies (maps) remotes while cable testing
    • Conducts link tests to ID speed
    • Verifies functional speed capability of terminated unconnected cable runs by sampling data packets between two LanScaper units, which exercises the run and reports the result
    • Automatically accesses DHCP host and obtains network information
    • Tests cabling configuration and verifies connectivity and length of run while conducting tests for opens, shorts, miswires, split pairs, and reversals
    • Identifies HUBs, NIC, or auto MDI/MDI-X devices
    • Blinks HUBs to ascertain connected configuration
    • Displays advertised network speed/duplex
    Call About Kit Complete with 8 Remotes in Carry Bag NT-750 Price = $ 855.50 Ex GST