Fully Equipped with 3-Electrode Single Stage Ceramic Gas Tube Arresters 10KA/10A 7.5×11.5mm
Simple installation into Krone-LSA® disconnect block
DC Sparkover Voltage (at 100V/sec): 230V +/-20%
Impulse Sparkover Voltage (at 100V/microsec): 500V (max)
Impulse Sparkover Voltage (at 1KV/microsec ): 650V (max)
Insulation Resistance at 100Vdc: 10,000 MΩ (min)
DC Holdover Voltage: 135V (max)
Capacitance (1 MHz): 3.0pF (max)
Brand NEW.
ACA Approved
® Krone-LSA is a registered trademark of Krone GmbH, Germany
Suit AMFIL or ProfilTM Frames and Backmount Frames,
White and Grey Colour. Numbered from 1 to 0
NEW
Backmount 10 Pair IDC Module to Screw Terminals
Austel Approved
Low Profile Surface mount box and an embedded 10 Pair Disconnect Module. Cream Colour
165x85x37mm
Low Profile Surface mount box with two embedded 10 pair Disconnect Modules. Light Grey Colour, Lid secured with 2 screws.
170x120x43mm
30 pair Box Only with stainless steel frame. NO MODULES INCLUDED.
155x105x55mm
Face is 180mm x 210mm
Body is 140mm x 170mm and 105mm deep
External Dia ;270mm Wide 340mm High 90mm Deep,
Internal Dia; 175mm Wide 245mm High 75mm Deep
3 way Backmount frame inc.
Painted Grey Colour, Key Lock Entry
NEW External Weatherproof Box with lock
with 3 way Backmount frame and Earth connection.
External Dimensions 25 cm high, 17 cm wide, 10 cm deep
Cover Slides up before hinging back and remaining in the open position for access.
Comes with steel bracket to allow pole mounting. Light Green Colour
Removable Lid, can accommodate Protection Modules,
Earth Terminal on short lead. Grey Colour 210x160x90mm
Face is 255mm x 255mm
Body is 215mm x 215mm and 105mm deep
Earth Terminal on short lead. Grey Colour 315x210x120mm
with 10 way Backmount frame and Earth connection.
External Dimensions 37 cm high, 19 cm wide, 12 cm deep
Comes with steel brackets to allow pole mounting. Light Green Colour
Low Profile 10 Pair Box with Earth Terminal, Can accommodate protection module. THIS ITEM IS NOT ACA APPROVED,
An approved 10 Pair Module is INCLUDED 170x120x35mm Grey Colour
Note; Module Hinges and Lays down to allow lid to be positioned.
110 Pair, Stainless Steel Backmount frame with Grey Plastic feet.
110 Pair, AMFIL or ProfilTM frame with Grey Plastic feet and Earth Bar.
Cover to fit 11 Way Frames Backmount, AMFIL or ProfilTM Steel Construction painted grey with Lock and keys, Includes accessories for frame
Surface mount 2RU 19 inch wall Bracket, with hinged swing feature.
Accepts 140mm deep panels.
Surface mount 4RU 19 inch wall Bracket, with hinged swing feature.
Surface mount 6RU 19 inch wall Bracket, with hinged swing feature.
660 Pair Backmount Frame, 2 x 33 Way Stainless Steel backmounts on steel frame, jumper rings.
Requires assembly.
Covers are NOT available, Dimensions L 950 x W 360
Recessed Stainless Steel Backmount frame, for 19 inch racks.
Max Capacitity is 15 Modules. Takes up 3RU positions.
Has jumper rings in centre positions only
Fits to top of Disconnect Module and allows a label to used on modules also covers module. Hinged Double sided unit
Fits to backmount frame and takes up one module position, has Paper label on top for labeling a group of modules.
Set of two plastic hooks for 11 & 27 Way frames.
Hooks to hang covers on.
