-New Products & News
!
DC Block LIU
Weight: kg
Larger picture

DC Blocking Line Isolation Unit "NEW"

DC Isolating or Blocking LIU Suitable for 'Music on Hold' and 'Public Address' RJ Sockets ( Changeable cords ) A tiny 54x26x24mm, Grey Colour.

Cords available are; 3.5Mono - 3.5 Stereo - RCA - RJ12 - 6.3mm Phono.   Please specify your cord requirement. There are some limitations.

If NOT specified we will supply 3.5 Stereo on the Music end and RJ12 on the system end.  

Specifications:

Limiting: 2.8V Peak to Peak when Terminated with 600ohms 
Freq. Response: 20 to 20kHz - designed to minimise distortion.
Input Attenuation: Selectable via volume control
Safety Isolation: 3000V
Connections:
  Music Input: RJ11 Socket 4P2C to 3.5mm stereo plug, with 400mm cable ( Standard ) See options
  DC Blocking Output :

 

250 Volt DC to System RJ12 6 Way modular socket

30 OD IP55
Weight: kg

30 Pair IP55 Rated Distribution Box

NEW   External Weatherproof Box with lock

with 3 way Backmount frame and Earth connection.

External Dimensions 25 cm high, 17 cm wide, 10 cm deep

Cover Slides up before hinging back and remaining in the open position for access.

Comes with steel bracket to allow pole mounting. Light Green Colour

100 OD IP55
Weight: kg

100 Pair IP55 Rated Distribution Box

NEW   External Weatherproof Box with lock

with 10 way Backmount frame and Earth connection.

External Dimensions 37 cm high, 19 cm wide, 12 cm deep

Cover Slides up before hinging back and remaining in the open position for access.

Comes with steel brackets to allow pole mounting. Light Green Colour

Toggle Relay
Weight: kg

Toggle Relay Board

NEW

Toggle / Latching relay Board.

Changes state each time a input is pulsed, and remains in that state until same input is pulsed again.

Use Ring detect relay ( Ringmate 12-24 or AlertA Gamma ) to change state.

Board size is 105mm x 55mm fits into Jiffy Box ( not supplied )

Output Relay contacts are Single pole Change over  rated @ 240VAC 7 amps

DC10 Screw Term
Weight: kg

Disconnect Module to Screw Terminals

NEW

Backmount 10 Pair IDC Module to Screw Terminals

Austel Approved

HWB
Weight: kg

Horizontal Wall Bracket ( Box 25 )

NEW    Box of 25 Horizontal Brackets

Galvanised Steel
A2710
Weight: kg

USB MP3 Player for MOH & BGM

Designed for BGM systems in commercial installations requiring audio playback from a USB memory stick. Alternatively it can be used to add MP3 playback to any domestic audio system. Simply connects to an amplifiers RCA input and provides typical CD player style functionality ie: play/pause & track skip. Tracks will automatically loop providing a constant source of background music for PA systems. Line output level volume is adjustable via the side panel. Suitable for use with USB memory sticks or SD/SDHC/CF cards when used in conjunction with a card reader. USB NOT INCLUDED.

INCLUDES 12VDC plugpack. Dimensions: 100L x 40H x 55Wmm.

Features:
Supports MP3 folder hierarchy structure ie: will browse music inside folders on stick
Compact size
Line level volume adjustment
Simple plug and play operation
Box flange allows mounting to any surface
Automatic playback looping
Starts playback immediately on power up
If power is lost, playback will recommence at last position when power is restored
AlertA Gamma
Weight: kg

AC Powered Amplified Telephone Ringer

NEW Product Mains Powered Loud Sounding Alarm Suit Two Wire Analogue Telephones, Internal Speaker produces 103db. Internal LED visual Alert.

Can also have External Horn ( 108db ) using HSP15  & External Strobe attached ( see items below )

Higher outputs are possible depending on model of external speaker. Up to 115db

Note; This Unit CAN operate from 12 Volt DC Battery / Solar Systems ( Call for Details )

See Demonstration at this web address;

http://www.youtube.com/watch?v=JocoQ7AXMqg 

AV - USB
Weight: kg

USB 3 to USB 3 Insert / Joiner

NEW Product Flexible USB 3 Insert to suit Clipsal Wall plates, can also be used as joiner.

Features 2 x female USB sockets on short FLEXIBLE lead, One socket is able to clip into a Clipsal Style Wall plate.

Requires approx. 60mm clearance behind wall plate to allow the cable to bend 90 degrees or more. Can be used in any position on multi way flush plates.

Overall length is approx. 150 to 180mm long. There is a bit of variation between each unit.

 

 

T017A
Weight: kg

15 Metre Snake on Reel

NEW Product 15 Metre 250 Kg Cable Puller
P-4663
Weight: kg

Mode 3 RJ45 Socket

Mode-3 Security IDC Jack

NEW Product  RJ45 8P4C IDC jack with 2 IDC connections per contact allowing easy line-in and line-out for typical alarm dialler applications. Compatible with most standard Australian flush plates. Rear termination with Krone Tool,
This performs the same function as a 611 Socket.

54-12
Weight: kg
Larger picture

Staples 10mm long to Suit Rapid 28

Available Again Suitable for 5mm Cables

Also suitable for Arrow Brand T-18 Box of 1000

 

54-13
Weight: kg
Larger picture

Staples 12mm long to Suit Rapid 36

Available Again Suit 6mm Cable

Also suitable for Arrow Brand T-25 Box of 1000

 

30BP
Weight: kg

30 Pair Recessed Box Plastic

NEW Product  Plastic Box to take 3 x 10 Pair Disconnect Modules ( Not Included )

Face is 180mm x 210mm

Body is 140mm x 170mm and 105mm deep

50BP
Weight: kg

50 Pair Recessed Box Plastic

NEW Product  Plastic Box to take 5 x 10 Pair Disconnect Modules ( Not Included )

Face is 255mm x 255mm

Body is 215mm x 215mm and 105mm deep