-Public Address Equipment
!

12 Watt RMS 18 Watt Max PA Amplifier
PA12
Weight: kg
!
PA-40W
Larger picture 

PannaxTM Brand Amplifier. 

Old Part Number Was PA40W

2 x 6.3mm Mics, 1 x 3.5mm Mono Aux Input, Individual volume controls. On / Off switch.

240VAC and 12VDC Power Input, 4 to 16 Ohm Speaker Output.  150x180x60mm

Specification

Power Output

12W/RMS 18W/MAX

Power Supply

AC 240V, DC 12V

Frequency Response

50Hz ~ 20KHz

MIC input sensitivity

MIC x 2 - 6.3mm JACK -45dB+/-3dB

AUX input sensitivity

AUX x 1 - 3.5mm JACK -15dB+/-2dB

Output ( ohms )

4 ohms ~16 ohms

Harmonic Distortion Ratio

Below 3%

Signal To Noise Ratio

Above -60%

Dimension ( W x H x D )

165 x 70 x 180 mm

20 Watt RMS PA Amplifier 4-8 Ohm Output
PA20
Weight: kg
!
PA20
Larger picture 

PannaxTM Brand Amplifier. 

2 x 6.3mm Mics input, 1 x RCA Stereo Aux Input, Individual volume controls. Treble and Bass Control, On / Off switch.

Priority/Vox on Mic 1

Switchable Dynamic or Condenser Mic on Input 1

240VAC Input, 4 to 8 Ohm Speaker Output.  220x165x60mm

Specification

Power Output

20W/RMS

Power Supply

AC 240V, 

Frequency Response

50Hz ~ 18KHz

MIC input sensitivity

MIC x 2 - 6.3mm JACK -45dB+/-3dB

AUX input sensitivity

AUX x 1 - RCA JACK -15dB+/-2dB

Treble Control

10KHz +/-10dB

Bass Control

100Hz +/-10dB

Output ( ohms )

4 ohms ~ 8 ohms

 

 

Harmonic Distortion Ratio

Below 3%

Signal To Noise Ratio

Above -60dB

Dimension ( W x H x D )

220 x 165 x 60 mm

40 Watt RMS PA Amplifier 100 Volt Output
PA40
Weight: kg
!
PA40 NEW
Larger picture 

PannaxTM Brand Amplifier. 

4 x 6.3mm Mics input, 1 x RCA Stereo Aux Input, Individual volume controls. Treble and Bass Control, On / Off switch.

Priority/Vox on Mic 1

240VAC and 24VDC Power Input, 70 & 100 Volt Output also 4 to 8 Ohm Speaker Output.  310x235x80mm

Specification

Power Output

40W/RMS

Power Supply

AC  240V, DC 24V

Frequency Response

50Hz ~ 15KHz

MIC input sensitivity

MIC x 4 - 6.3mm JACK -45dB+/-3dB

AUX input sensitivity

AUX x1 - RCA JACK -22dB+/-3dB

Treble Control

10KHz +/-10dB

Bass Control

100Hz +/-10dB

Line Out 

RCA Sockets

Output ( ohms )

4 ohms, 8 ohms. 

Output ( V )

70v & 100V

Harmonic Distortion Ratio

Below 3%

Signal To Noise Ratio

Above -60dB

Dimension ( W x H x D )

310 x 235 x 80 mm

60 Watt RMS PA Amplifier 100 V Output
PA-60
Weight: kg
!
PA60 New
Larger picture 

PannaxTM Brand Amplifier. 

3 x 6.3mm Mics input, 2 x XLR Mic Inputs, 3 x RCA Stereo Aux Input, MP3, Tuner & CD,

Individual volume controls. Treble and Bass Control, On / Off switch.

4 Zone Manual Selector

Priority / Vox on Mic 1

240VAC and 24VDC Power Input, 100 Volt Output also 4 to 8 Ohm Speaker Output.  435x280x100mm

Specification
Power Output 60W/RMS
Power Supply AC 230V, DC 24V
Frequency Response 50Hz ~15KHz
MIC input sensitivity MCI x 3 - 6.3mm JACK -45dB+/-3dB & 2 x XLR
AUX input sensitivity AUX x 3 x Stereo RCA JACK -22dB+/-3dB
AUDIO source in x 3 - RCA Stereo
Treble Control 10KHZ +/- 10dB
Bass Control 100Hz +/-10dB
Output ( ohms )  8 ohms,
Output ( V ) 50V & 70V & 100V
Harmonic Distortion Ratio Below 3%
Input Select Sensitivity CD:-5dB+/-2dB, MP3:-12dB+/-2dB, Tape:-12dB+/-2dB
Signal To Noise Ratio Above -60dB
Dimension ( W x H x D ) 435 x 280 x 100 mm

120 Watt RMS PA Amplifier 100 V Output
PA-120
Weight: kg
!
PA120 New
Larger picture 

PannaxTM Brand Amplifier. 

3 x 6.3mm Mics input, 2 x XLR Mic Inputs, 3 x RCA Stereo Aux Input, MP3, Tuner & CD,

Individual volume controls. Treble and Bass Control, On / Off switch.

4 Zone Manual Selector

Priority / Vox on Mic 1

19" Rack Mount

240VAC and 24VDC Power Input, 100 Volt Output also 4 to 8 Ohm Speaker Output.  445x280x140mm

Specification
Power Output 120W/RMS
Power Supply AC 230V, DC 24V
Frequency Response 50Hz ~15KHz
MIC input sensitivity MCI x 3 - 6.3mm JACK -45dB+/-3dB & 2 x XLR
AUX input sensitivity AUX x 3 x Stereo RCA JACK -22dB+/-3dB
AUDIO source in x 3 - RCA Stereo
Treble Control 10KHZ +/- 10dB
Bass Control 100Hz +/-10dB
Output ( ohms )  8 ohms,
Output ( V ) 50V & 70V & 100V
Harmonic Distortion Ratio Below 3%
Input Select Sensitivity CD:-5dB+/-2dB, MP3:-12dB+/-2dB, Tape:-12dB+/-2dB
Signal To Noise Ratio Above -60dB
Dimension ( W x H x D ) 435 x 280 x 140 mm

240 Watt RMS PA Amplifier 100 V Output
PA-240
Weight: kg
!
PA120 New
Larger picture 

PannaxTM Brand Amplifier. 

3 x 6.3mm Mics input, 2 x XLR Mic Inputs, 3 x RCA Stereo Aux Input, MP3, Tuner & CD,

Individual volume controls. Treble and Bass Control, On / Off switch.

4 Zone Manual Selector

Priority / Vox on Mic 1

19" Rack Mount

240VAC and 24VDC Power Input, 100 Volt Output also 4 to 8 Ohm Speaker Output.  445x280x140mm

Call for Details and Pricing

Specification
Power Output 240W/RMS
Power Supply AC 230V, DC 24V
Frequency Response 50Hz ~15KHz
MIC input sensitivity MCI x 3 - 6.3mm JACK -45dB+/-3dB & 2 x XLR
AUX input sensitivity AUX x 3 x Stereo RCA JACK -22dB+/-3dB
AUDIO source in x 3 - RCA Stereo
Treble Control 10KHZ +/- 10dB
Bass Control 100Hz +/-10dB
Output ( ohms )  8 ohms,
Output ( V ) 50V & 70V & 100V
Harmonic Distortion Ratio Below 3%
Input Select Sensitivity CD:-5dB+/-2dB, MP3:-12dB+/-2dB, Tape:-12dB+/-2dB
Signal To Noise Ratio Above -60dB
Dimension ( W x H x D ) 435 x 280 x 140 mm

135mm 15 Watt Horn Speaker
HSP2
Weight: kg
!
HSP2
Larger picture 

White plastic, 8 Ohm Weather proof, swivel bracket included. 

150mm 15 Watt 8 Ohm PANNEX Horn speaker
HSP15
Weight: kg
!
HSP15
Larger picture 

Compact 15W Rated Input , 8Ω impedance Reflex Horn Speaker with 300-10000Hz Frequency Response and 108dB Sound Pressure Level.

200mm Aluminium Flare Horn with Steel Mounting bracket.

Rated Input              15W

Rated Impedance         8 Ohm

Sound Pressure Level     108dB (1W/M)

Frequency Response      300-10000Hz

Polarity                  Hot:Rad; Com:Black

Operating Temperature    -20ºC to +55ºC(must be free from dew condensation)

Finish                   Horn flare:Aluminum, Blue/Bracket:steel,Blue/Speaker cable:Polyvinyl chloride insulated cabtyre cable(2x2.5mm in diameter,350mm In length)

Dimensions              150(D) x 150(L)mm

Weight                  1.25Kgs

 

250mm 25 Watt 100 Volt PANNAX Horn Speaker
HSP25
Weight: kg
!
HSP25
Larger picture 

250mm Aluminium Flare Horn with Steel Mounting bracket.

Multi Tapped 25W, 15W, 10W, 5W & 3W Screw adjustment

6 Watt 100V Wall Mount Speaker
SPK4
Weight: kg
!
SPK4
Larger picture 

Surface Mount, 0.25W, 0.75W, 1.5 W, 3W & 6 Watt Tappings 

  • All ABS
  • 6 Watts Loudspeaker Complete
  • Ideally Suited for High Quality Speech & background Music
  • Easy Installation
  • Transformer

    White Plastic Case 290x215x100mm

    • Specifications:
    Power Taps: 6W ,3W ,1.5W, 0.75W, 0.25W taps
    SPL: 1W @ 1M at 93dB
    Frequency Response: 160Hz - 20kHz
    Dimensions: 290L x 215W x 100D
    Weight: Approx: 2Kgs

    6 Watt 100V Wall Mount Speaker
    C0891
    Weight: kg
    !
    C-0893 Spk
    Larger picture 

    Surface Mount, 1.5W, 3W & 6 Watt Tappings 

    White Plastic Case 210x210x85mm

    Specifications:
    Power Taps: 6W ,3W ,1.5W taps
    SPL: 1W @ 1M at 93dB
    Frequency Response: 160Hz - 20kHz
    Dimensions: 210L x 210W x 85D
    Weight: Approx: 1.2Kgs

    125mm 6 Watt 100 Ceiling Speaker
    CSP125
    Weight: kg
    !
    CSP125
    Larger picture 

    Flush Mount with Cream Coloured Steel Grill. Click lock mounting.

    Hole Cutout 166mm 

    Specifications:
    Type: 100V line
    Size: 125mm Cone 
    Power Taps: 3 Watt or 6 watt
    Frequency Response: 100Hz- 15kHz
    Sensitivity (1W/1M): 92dB
    Hole Cutout : 166mm

    200mm 5 Watt 100 V Ceiling Speaker
    C2132
    Weight: kg
    !
    C2132 Speaker
    Larger picture 

    Flush Mount, 0.33W, 0.66W, 1.25W, 2.5W & 5 Watt Tappings, White Plastic Grill.

    Hole cutout 246mm

    Specifications:
    Type: 100V line
    Size: 200mm
    Power Taps: 0.33, 0.66, 1.25 , 2.5, 5W
    Frequency Response: 100Hz- 15kHz
    Sensitivity (1W/1M): 92dB
    Hole Cutout : 246mm     

    Multi-Purpose Line Isolation Unit
    LIU Micro
    Weight: kg
    !
    Liu Only
    Larger picture 

    LIU Suitable for 'Music on Hold' and 'Public Address' RJ Sockets ( Changeable cords ) A tiny 54x26x24mm, Grey Colour.

    Cords available are; 3.5Mono - 3.5 Stereo - RCA - RJ12 - 6.3mm Phono.   Please specify your cord requirement. There are some limitations.

    If NOT specified we will supply 3.5 Mono on the Music end and RJ12 on the system end.  

    Specifications:

    Limiting: 2.8V Peak to Peak when Terminated with 600ohms 
    Freq. Response: 20 to 20kHz - designed to minimise distortion.
    Input Attenuation: Selectable via volume control
    Safety Isolation: 3000V
    Connections:
      Music Input: RJ11 Socket 4P2C to 3.5mm stereo plug, with 400mm cable ( Standard ) See options
      Output: 6 Way modular socket

    Alert & Evac Tone Generator
    CH6
    Weight: kg
    !
    ch6

    Supplies Australian Standard AS2220 Evacuation & Alert Tones, and 2 x generic Bell sounds.

    The CH6 is a tone module fitted into a compact plastic box. (only 83x54x30mm) It can be used as a stand alone unit on any brand and model amplifier or mixer. A 5 way terminal block gives access to the modules 4 tones. All you need is a clean contact closure to activate the tones. The audio output is unbalanced line level with a screwdriver adjustable pot inside on the board. The CH6 is powered by a 12Vac 500mA (supplied) plugpack.